Verified seller 
Javac PRO 3 welding positioner for sale by auction
≈ $529.50
Moorenweis
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
€450
≈ GHS 5,796
≈ $529.50
Germany, Moorenweis
€350
≈ GHS 4,508
≈ $411.80
Germany, Velen-Ramsdorf
€890
≈ GHS 11,460
≈ $1,047
Germany, Velen-Ramsdorf
€800
≈ GHS 10,300
≈ $941.30
Germany, Velen-Ramsdorf
€290
≈ GHS 3,735
≈ $341.20
Germany, Velen-Ramsdorf
€2,400
≈ GHS 30,910
≈ $2,824
Germany, Velen-Ramsdorf
€699
≈ GHS 9,003
≈ $822.40
Germany, Velen-Ramsdorf
€1,000
≈ GHS 12,880
≈ $1,177
Germany, Velen-Ramsdorf
€1,200
≈ GHS 15,460
≈ $1,412
Germany, Velen-Ramsdorf
€2,100
≈ GHS 27,050
≈ $2,471
Germany, Velen-Ramsdorf
€900
≈ GHS 11,590
≈ $1,059
Germany, Velen-Ramsdorf
€1,100
≈ GHS 14,170
≈ $1,294
Germany, Velen-Ramsdorf
€2,990
≈ GHS 38,510
≈ $3,518
Germany, Velen-Ramsdorf
€1,100
≈ GHS 14,170
≈ $1,294
Germany, Velen-Ramsdorf
€3,900
≈ GHS 50,230
≈ $4,589
Germany, Velen-Ramsdorf
€2,600
≈ GHS 33,490
≈ $3,059
Germany, Velen-Ramsdorf
Description:
– The table can be tilted and clamped at an angle of 0° to 90°.
– Start/stop via location-independent foot switch.
– Direction of rotation selectable right/left.
– Turning time adjustable.
– The rotary table has a 60 mm hollow shaft.
– The turntable has a diameter of 340 mm. The surface is chrome-plated to protect against welding spatter.
– The table speed is adjustable from 0.6 − 6 rpm.
– The welding machine can be controlled via the turntable control.
– The ground contact transmits 300 A /100 %.
– The turntable and the controller are separated.
– RF protected.
Technical data:
Model PRO 3 PN
Mains voltage 230 V, 50Hz
Rotary Motor 90V DC65W
Mass connection 300A/100%
Tilt range 0° to 90°
Turntable diameter 340 mm
max. workpiece diameter approx. 510 mm
Speed 0.6 – 6 rpm
Torque 11.8 Nm
Directions of rotation clockwise/counterclockwise
Max. Load Horizontal 290 kg
Mounting bolt circle Ø 114 mm to max. 302 mm
Hollow shaft 60 mm
Slot width turntable 14 mm
Dimensions ( L x W x H ) 380 x 340 x 425 mm
Weight 62 kg
Article number 02.30.01.10132
incl. 4 jaw chuck (external clamping)
Source: show contacts
Total weight approx. 80kg