Hauser S40-400 jig grinding machine
SAINT-GENIX-LES-VILLAGES
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+33 4 86 11...
Show
+33 4 86 11 77 77
50 Hz
Germany, Location:stuttgart
NC control completely retroffited in 2020.
TECHNICAL CHARACTERISTICS :
Stroke X axis: 650 [mm]
Max. Stroke speed X axis: 4000 [mm/min]
Working feed X axis: 0 - 1800 [mm/min]
Stroke Y axis: 450 [mm]
Working feed Y axis: 0 - 1800 [mm/min]
Stroke Z axis: 130 [mm]
Min. Stroke speed Z axis: 0.5 [mm/min]
Max. Stroke speed Z axis: 12000 [mm/min]
Stroke frequency Z axis: max. 4 [Hz]
Stroke W axis: 500 [mm]
Planetary speed C axis: 5 - 250 [rpm]
Max. Stroke speed W axis: 800 [mm/min]
Stroke U axis (radial feed): 5.5 [mm]
Distance between columns: 750 [mm]
Table length: 770 [mm]
Table width: 630 [mm]
Clearance between grinding motor and table: 585 [mm]
Max. load on table: 500 [Kg]
Supply voltage: 400 [V]
Weight: 4550 [Kg]
INCLUDED EQUIPMENT:
1 tool detection device
1 DONALDSON oil mist extraction unit DMC-D1,
2 45 S grinding motors, speed 9000 - 4500 [rpm] - reference: 144017,
1 80 S grinding motor, speed 40000 - 80000 [rpm] - reference: 144021,
1 T10 grinding turbine, speed: 100,000 [rpm] - reference: 157420,
1 turbine holder with filter - reference: 166497,
1 profile dresser on table, 200 [°] pivotable - reference: 194590
1 coolant tank + paper tape filtration device
6 collets,
1 operator's manual in French.
RETROFIT WORK CARRIED OUT IN 2020:
ELECTRICAL SECTION:
Supply of an electrical cabinet equipped with a FANUC 0iF numerical control,
Supply of a control panel for FANUC with 15" screen and keyboard,
Axes controlled by the numerical control: X, Y, Z, C, and U,
Wiring of the electrical cabinet,
Machine wiring with replacement of all sensors and cables,
Connection and powering of the electrical cabinet,
Adjustment of axis servos,
Installation and programming of cycles and conversational pages for HAUSER.
MECHANICAL SECTION:
Supply of axis motor adapters,
Supply of an electrical rotary joint,
Scraping of the table surface,
Reassembly of the entire head and adaptation of the Fanuc motors on the C and U axes,
Installation of all measuring systems (including 2 HEIDENHAIN linear glass scales on the X and Y axes).
ADDITIONAL CYCLE DEVELOPMENT:
Development of a Blind Bore cycle and associated conversational pages,
Modification of the conversational programming for the U axis: changing from piece diameter programming to radius programming in all existing
grinding cycles,
Modification of wheel data to be entered by radius instead of diameter,
Modification of all wheel dressing cycles, straight, shapes, and ISO,
Modification of all dressing compensations in all grinding cycles.
Machine visible under power in our premises by appointment.
Price on request, loading on truck included.
Possibility of shipping Worldwide.
The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.
CN rétrofité en 2020.
CARACTÉRISTIQUES TECHNIQUES:
Type de CN : FANUC 0i-MF
Course axe X : 650 [mm]
Vitesse maxi. course axe X : 4000 [mm/min]
Vitesse avances de travail axe X : 0 - 1800 [mm/min]
Course axe Y : 450 [mm]
Vitesse avances de travail axe Y : 0 - 1800 [mm/min]
Course axe Z : 130 [mm]
Vitesse mini. course axe Z : 0.5 [mm/min]
Vitesse maxi. course axe Z : 12000 [mm/min]
Fréquence course axe Z : max. 4 [Hz]
Course axe W : 500 [mm]
Vitesse axe C (planétaire) : 5 - 250 [rpm]
Vitesse maxi. course axe W : 800 [mm/min]
Course axe U (avance radiale) : 5.5 [mm]
Distance entre colonnes : 750 [mm]
Longueur table : 770 [mm]
Largeur table : 630 [mm]
Passage libre entre le moteur de meulage et la table : 585 [mm]
Poids maxi. admissible sur la table : 500 [Kg]
Tension d'alimentation : 400 [V]
Poids : 5000 [Kg]
ÉQUIPEMENTS INCLUS:
1 dispositif de détection d'outil HAUSER
1 centrale d'aspiration de brouillard d'huile DONALDSON type DMC-D1,
2 moteurs de meulage 45 S, vitesse 9000 - 4500 [tours/min] - référence: 144017,
1 moteur de meulage 80 S, vitesse 40000 - 80000 [tours/min] - référence: 144021,
1 turbine de rectification T10- vitesse: 100'000 [tours/min] - référence: 157420,
1 porte-turbine avec filtre - référence: 166497,
1 dresseur sur table, pivotable à 200 [°] - référence: 194590
1 bac d'arrosgage + filtration papier
6 pinces de serrage
1 manuel d'opérateur en Français.
TRAVAUX DE RÉTROFIT RÉALISÉS EN 2020:
PARTIE ELECTRIQUE:
Fourniture d'une armoire électrique équipée d'une commande numérique type Fanuc 0iF,
Fourniture d'un pupitre pour Fanuc avec écran et clavier 15",
Axes pilotés par la commande numérique X, Y, Z, C et U,
Câblage de l'armoire électrique,
Câblage machine avec le remplacement de tous les capteurs et câbles,
Raccordement et mise sous tension de l'armoire électrique,
Réglage des asservissements d'axes,
Mise en place et programmation des cycles et pages conversationnelles pour HAUSER.
PARTIE MÉCANIQUE:
Fourniture des adaptations moteurs d'axe,
Fourniture d'un joint tournant électrique,
Grattage et mise en géométrie de la surface table,
Remontage de l'ensemble de la tête et adaptation des moteurs Fanuc sur les axes C et U,
Mise en place de tous les systèmes de mesure (dont 2 règles en verre HEIDENHAIN sur les axes X et Y).
COMPLÉMENT DE DÉVELOPPEMENT CYCLES:
Développement d'un cycle Alésage Borgne et développement des pages conversationnelles associées,
Modification de la programmation conversationnelle de l'axe U : passage d'une programmation avec diamètre de pièce à une programmation au
rayon, dans tous les cycles de rectifications existants,
Modification des données de meules renseignées au rayon à la place des diamètres,
Modification de tous les cycles de taillage de meule, droit, formes et ISO,
Modification de toutes les compensations de taillage dans tous les cycles de rectification.
Machine visible sous tension pour essais en nos locaux, sur RDV.
Prix HT sur demande, chargement sur camion inclus.
Possibilité d’expédition dans toute la France ainsi qu’à l'international.
Plus de photos et détails sur demande.
Descriptif technique à titre indicatif, sans engagement de notre part.
Machine similaire aux marques moore , okamoto , röders , elb , ger , sip , jones shipman , jung , favretto , blohm , studer à voir également rectifieuse plane , cylindrique , tour , centre d'usinage , fraiseuse