Eumach HSM-5XC machining centre
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 40...
Show
+49 162 4027581
Germany, Kaiserslautern
Power and weightVoltage: 400 VFrequency: 50/60 HzInstalled power: 75 kVA
Voltage: 400 V
Frequency: 50/60 Hz
Installed power: 75 kVA
Operating hours (Heidenhain – actual machine data)Control ON time: 42,157 hMachine ON time: 37,219 hProgram run time: 18,252 hSpindle running time: 13,907 hS head running time: 0 h
Control ON time: 42,157 h
Machine ON time: 37,219 h
Program run time: 18,252 h
Spindle running time: 13,907 h
S head running time: 0 h
Table systemT-slot table: 18 × 6 × 100 mmRotary table (5-axis), built-in saddle designDiameter: Ø 610 mmSpindle to table center: 0–715 mmSpindle to table top: 105–715 mmMax. workpiece load: 500 kg
T-slot table: 18 × 6 × 100 mm
Rotary table (5-axis), built-in saddle designDiameter: Ø 610 mmSpindle to table center: 0–715 mmSpindle to table top: 105–715 mmMax. workpiece load: 500 kg
Diameter: Ø 610 mm
Spindle to table center: 0–715 mm
Spindle to table top: 105–715 mm
Max. workpiece load: 500 kg
Axis travelsB-axis tilt: +30° to −120°C-axis rotation: 360° (0.001° resolution)
B-axis tilt: +30° to −120°
C-axis rotation: 360° (0.001° resolution)
Geometric distancesSpindle to column cover: 629 mmSpindle to table center: 947 mm
Spindle to column cover: 629 mm
Spindle to table center: 947 mm
SpindleBearings: Ø 70 mm ceramicMax torque: 160 Nm
Bearings: Ø 70 mm ceramic
Max torque: 160 Nm
Axis motorsX/Y/Z: Siemens 1FK7083 (16 Nm)A/B: Siemens 1FW6130 (1320 Nm)
X/Y/Z: Siemens 1FK7083 (16 Nm)
A/B: Siemens 1FW6130 (1320 Nm)
FeedsRapid traverse (X/Y/Z): 36 / 36 / 24 m/minCutting feedrate: 1–7500 mm/min
Rapid traverse (X/Y/Z): 36 / 36 / 24 m/min
Cutting feedrate: 1–7500 mm/min
Tool magazineType: Double-arm tool changer, 430 mm strokeCapacity: 32 toolsMax tool diameter: 150 mmMax diameter without adjacent tools: 300 mm
Type: Double-arm tool changer, 430 mm stroke
Capacity: 32 tools
Max tool diameter: 150 mm
Max diameter without adjacent tools: 300 mm
application type: Milling
Location: Slovenia
machine type: Universal Machining Centre
control unit brand: HEIDENHAIN
Control Brand: HEIDENHAIN
Table Load: 800 kg
Number of Axes: 5
Max. Tool Weight: 7 kg
Number of Tools: 32
Spindle Power: 29.3 kW
Taper Size: BT 40