Emco Hyperturn 65 Powermill G2 metal lathe
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
Show
+49 162 5858448
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Location: AT
Spindle Power: 29 kW
Max. torque: 250 Nm
Max. drive power: 29 kN (as provided)
Speed range: 0–5000 rpm
B-axis with direct drive: +/- 120°, hydraulic clamping
Glass scales: X1 (incl. air system), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl)
Bar length: 300–1200 mm
Bar diameter: 10–104 mm
Material support surface (front view): 800 x 1250 mm
Material capacity: 12 bars with 65 mm diameter
Max. load capacity: 400 kg (max. 74 kg/bar)
Rectangular material: min. edge length 6 mm; max. circumference 105 mm
Hexagonal material: SW 5 to 85 mm
Push rod retraction depth: 1470 mm
Power supply: 24 V DC (interface)
Dimensions: length 1800 mm; width 1315 mm
Slide/spindle height: 1090–1330 mm
Y-axis travel: +/- 120 mm
Main spindle (direct drive)
Subspindle (direct drive)
Max. torque: 250 Nm
Milling spindle (direct drive)
Max. drive power: 37 kW
Max. torque: 30 Nm
Speed range: 0–12000 rpm
Tool turret (direct drive)
Max. drive power: 10 kW
Max. torque: 30 Nm
Speed range: 0–12000 rpm
Kinematics and axes
Cross slide at the top with turning/milling spindle as motor spindle
hydraulic clamping during turning
Tooling
40-position tool magazine
HSK-T63
12-position radial turret with direct drive
BMT55P tool interface
Spindles and clamping
High-clamping cylinder with draw tube for main spindle
Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in counter spindle
Programmable clamping pressure for main and counter spindle
External feed flushing on main and counter spindle
Mechanical holding brake on main and counter spindle
C-axis for main and counter spindle
Control and HMI
SINUMERIK ONE / OPERATE
EMCONNECT app-based UI
22" multi-touch display
IPC with 240 GB
SHOPTURN dialog programming
3D simulation and Drawing
Residual material detection
Unblocking from external memory
CAD reader (DXF import)
TRANSMIT and TRACYL for C-axis programming
USB interface
Network drive (Ethernet)
PC keyboard incl. HMI hotkey
LED status bar
Fluids and utilities
2 coolant lines at 25 bar
2 flushing pumps at 4.3 bar
Control cabinet air conditioning unit
Cooling system for spindle motors
milling spindle
B-axis torque motor
and turret direct drive
Hydraulic unit
Machine light
8 leveling elements
Feedback/measurement
Additional equipment
Chip management and filtration
Hinged belt chip conveyor
Belt filter system
980 liters
Dirty water pump
Control/monitoring options
BAOD-SL electronic handwheel (portable
magnetic mount for Siemens controllers)
EMCO tool breakage and wear monitoring / B40D-SL
Wireless probe / HSK drill breakage control BK-MICRO
4-axis turning / balance cutting (SINUMERIK option)
Alternative-end spindle speed (SINUMERIK option)
Turret as tailstock (SINUMERIK option)
Counter spindle as tailstock (SINUMERIK option)
Bar feeder (specifications as provided)
Round material