New Vogamakina metal powder coating machine
≈ $11,410
İSTANBUL/TUZLA
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+90 532 344...
Show
+90 532 344 49 50
+90 216 210...
Show
+90 216 210 13 11
Turkey 
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Purpose of use: curing of powder coating
Maximum temperature: 220ºC
INTERNAL USEFUL DIMENSIONS
Length : 2.000 mm
Width : 1,500 mm
Height : 1,800 mm
Heating capacity : 30 KW
The furnace heating system is designed as a forced convection system. It is based on the principle of pumping air into the furnace by means of a circulating fan and raising the temperature in the furnace by means of the heat transfer provided by the air passing through the heating module.
The walls of the furnace and heating module are made of modular sheet metal and high-density insulating panels. Air distribution ducts with regulated dampers inside the oven ensure a homogeneous temperature at every point. The temperature control device is of the digital type and ensures precise temperature control of the oven.
The heating module is placed on the side, back or top of the oven and consists of an insulated heating chamber, a heating cell with resistance inside, a circulation fan that can operate at 250ºC, and a maintenance cover.
External surface material: 1 mm carbon steel sheet, externally powder coated
Inner surface material: 1 mm galvanized steel sheet, uncoated
Insulation thickness: 150 mm
Insulation : Ground - 50 mm stone wool (50 kg/m³)
Side and top panels - 150 mm stone wool (50 kg/m³)
Heat transfer : Convection, via closed air circuit
Heating type : Direct heating with electric heaters
Temperature control : On/off, 0-400ºC Digital thermostat, Fe-Const thermocouple (type J)
Ambient temperature : +10ºC (during operation)
Oven uniformity: ±2.5ºC (5ºC total)
Control accuracy: ±1ºC
Heat-up time: 25-30 min (empty oven)
Oven door : manual, hinged type, on one side
Loading/unloading: manual pushing from the workshop floor into the oven
HEATING DEVICE
Source: Electricity
Circulation fan : 380V - 50Hz, housing and propeller made of sheet metal
Electric heaters : Tubular type, coil heaters with increased surface area
CONTROL PANEL AND ELECTRICAL INSTALLATION
The electrical control cabinet is mounted externally on the side wall of the oven and is internally wired from the motors and heating system to the cabinet. The control panel consists of SCHNEIDER ELECTRIC switchgear components.