Flier agricultural conveyor
Nieuwerkerk aan den IJssel
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
Netherlands, Nieuwerkerk aan den IJssel
Netherlands, Nieuwerkerk aan den IJssel
Netherlands, Nieuwerkerk aan den IJssel
Netherlands, Nieuwerkerk aan den IJssel
Netherlands, Nieuwerkerk aan den IJssel
Netherlands, Nieuwerkerk aan den IJssel
Netherlands, Nieuwerkerk aan den IJssel
Netherlands, Nieuwerkerk aan den IJssel
Netherlands, Nieuwerkerk aan den IJssel
Netherlands, Nieuwerkerk aan den IJssel
Netherlands, Nieuwerkerk aan den IJssel
Netherlands, Nieuwerkerk aan den IJssel
Netherlands, Nieuwerkerk aan den IJssel
Netherlands, Barneveld
Netherlands, Tholen
Netherlands, Nieuwerkerk aan den IJssel
Netherlands, Nieuwerkerk aan den IJssel
Netherlands, Nieuwerkerk aan den IJssel
Netherlands, Nieuwerkerk aan den IJssel
Netherlands, Nieuwerkerk aan den IJssel
Trays : Vacuum drawn ‘Norm Pack 418’ tray.
Stack height : 50 trays.
Capacity : Maximum 1,000 trays, gross, per hour.
Description
Conveyor belt:
Stacks of trays are manually placed on the conveyor belt. The stacks may be up to 50 trays high. The conveyor has a length of 5,500mm, which can accommodate 20 stacks of 50 trays.
The stacks of trays are transported to the destacker when there is demand from the destacker.
Snarenband:
Snare belt transports trays from conveyor belt to roller conveyor
On the string belt, the trays are destacked , a label is stuck , the label is pressed around the corner and stacked up
Unstacker:
The destacker is used to unstack the stacks of trays. Grippers are mounted on the lifting table of the destacker, which pull the tray to be destacked down with it.When building the destacker, a maximum tray width of 300 mm was taken into account.
Stickers are printed, glued and pressed around the corner:
Next to the string belt, there is a height-adjustable leg on both sides with a label printer and sticker on it. All labels must be made with 1 label programme. This label programme runs on a PC. there is no PC at this machine
The label is stuck on the vertical part of the tray. Empty stickers are printed using 2 high-speed printers. Can have a logo, price, barcode. Anything is possible. Example, see easygrow sticker.
The printers are sold in the state as they are now.
Stacker:
Stacker is used to stack labeled trays. The stacking height is 50. The stacker is also designed for a tray width of up to 300 mm. The formed stack is discharged to roller conveyor
Roller conveyor:
On the roller conveyor, the formed stacks are buffered. The roller conveyor is six metres long which accommodates 22 stacks of trays.
Control:
All machines are controlled from a central control cabinet. The control cabinet contains a PLC of the brand Omron.
Last used 1 year ago. Used for 9 years
More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call.
See all the available machines at our website.
- Since 1977 supplier of reliable used agricultural and horticultural equipment
- Machines are checked for delivery
- Experienced team
- We can help you with getting the machine to your company
Duijndam Machines
The specialist in used agriculture and horticulture machinery
= More information =
General condition: good
Price: On request