Engel ES650H/200W-200HL-2F (2000) injection moulding machine
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
Show
+49 162 5858448
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Location: DE
Control Brand: ENGEL
Control Model: CC 200 (CC200)
Condition: Well-maintained and serviced
Mold weight: 1500 kg
Tie-bar distance (H × V): 920 × 750 mm
Platen size: 1150 mm
Opening stroke: 700 mm
Daylight (opening): 700 mm
Min. mold height: 450 mm
Max. mold height: not specified
Ejector stroke: 150 mm
Ejector force: 61 kN
Return force: not specified
Centering diameter (A side): 110 mm
Centering diameter (B side): 90 mm
Locking system: Hydraulic / Pneumatic
No. of cores: 4
Rotary table control: Yes
Core pull control: Yes
Index plate control: Yes
Max. shot volume: 200 cm³
Stroke volume: 392 cm³
Screw diameter: 50 mm
L/D ratio: 20
Screw speed: 290 rpm
Injection pressure: 1240 bar
Injection speed: 120 g/s
Plasticizing rate: 41 g/s
Nozzle orifice: 15 mm
Pump installed: 30 / 12.3 kW
SPC (Statistical Process Control): Yes
Pressure interface: Yes
2nd injection barrel: Yes
Mold monitoring: No
Special programs: Yes
Take-out device (robot): ERC 23/1-E
Travels: X = 500 mm, Z = 1400 mm
Max. mold dimensions (Y-axis): 1000 mm
Hot runner control: 18 zones
WZ sensor system: p–z–t–σ (Kistler)
Additional equipment: GealanXcomp
Automation cell: No
Filter dryer: No
Clamping unit
Injection unit 1 (650H)
Injection unit 2 (200W)
Max. shot volume: 140 cm³
Stroke volume: 69 cm³
L/D ratio: 24
Screw speed: 480 rpm
Injection pressure: 2000 bar
Injection speed: 60 g/s
Plasticizing rate: 12 g/s
Nozzle orifice: 15 mm
Pump installed: ~6.8 kW
Controls and functions
Additional equipment