Koike PNC-12 EXTREME plasma cutting machine
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
Show
+49 162 5858448
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Nürtingen
Germany, Nürtingen
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Weißenfels
Germany, Kaiserslautern
Germany, Pullach
Location: LV
Effective Cutting Area: 1500 x 3000 mm
Maximum Cutting Thickness: up to 50 mm
Rapid Travel Speed: 4000 mm/min
Maximum Cutting Speed: 3000 mm/min
Control: KOIKE D420
Control Functions: Rotation, mirror, nesting, recovery, piercing point selection
CNC Display: 7” color, multilingual
Data Input: USB / MDI
Program Format: EIA
Software: KOIKE PNC-CAM Expert V2E + FastCAM license
Preinstalled Cutting Patterns: 47 shapes
CAD Import: DXF, DWG
Auto Nesting / Sequencing: Yes
Motors: Stepping motors (X/Y), DC motor for torch lifter
Input Voltage: 1~ 200–240V, 50/60 Hz
X/Y Drive: Rack and Pinion, linear guides
Torch Holder: Ø35 mm
Initial Torch Height Control: Yes
Torch Collision Protection: Yes
Arc Voltage Height Control: Yes (1:1 or 50:1)
Plasma Source: Kjellberg CutFire 100i (100A)
Mains Voltage: 3~ 400V ±10%, 50 Hz
Power Consumption: 16.6 kVA (100% duty cycle)
Cutting Current: 35–100 A
Duty Cycle: 100% at 100 A
Cutting Range: 1–20 mm (recommended), max. 40 mm
Piercing Thickness: up to 20 mm
Open Circuit Voltage: 330 V DC
Efficiency: 0.92
Power Factor: 0.97
Cooling: Air cooled (built-in fan), torch gas cooled
Gas Supply: Air, 5.5 bar, 220 Nl/min
Protection Class: IP21
Dimensions: 710 x 280 x 590 mm
Additional information
Plasma Source
Control Unit
Laptop with FastCAM license
Plasma Table 3000 x 1500 mm (4 suction chambers)
Ventilation Unit with Outlets
Hoist – 500 kg Lifting Capacity
Piston Compressor 5.5 kW
270 L
10 bar
Air Dryer 1500 L/min
Lifting Magnet and Sheet Gripper
Nozzles
Electrodes
and Spare Parts