New Comacchio MCS 300 drilling rig
≈ $81,910
Kraków7508 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
+48 516 79...
Show
+48 516 792 494
Germany, Schrobenhausen
150 m
China, Shanghai
260 m
China, Shanghai
200 m
China, Shanghai
180 m
China, Shanghai
100 m
Ukraine, Kyiv
200 m
China, Shanghai
Germany, Peutenhausen / Gachenbach
1,000 m
China, Shanghai
25 m
Italy, SPELLO (PG)
50 m
China, Shanghai
400 m
China, Shanghai
100 m
China, Shanghai
MCS line drilling rig are suitable for drilling holes in rocks of different hardness with the possibility of setting the rig to a given angle of drilling from 0 do 360 degrees.
Basic types of drilling tools for MCS drilling rig:
- wire line core barrels with diamond bits,
- conventional core barrel with diamond bits and tungsten carbide core bit,
- tri-cone bits,
- tungsten carbide and PDC bits,
- DHH,
- augers.
The MC-S 300L rig is designed for drilling holes:
- geological reserche coring with diamond, PDC bits and TC core bits (60mm-BQ, 76m-NQ, 96mm-HQ)
- destructive drilling holes using PDC, tricone bits diameter from 65 mm to 143/216 mm in underground condition.
The basic drilling system used in this type of equipment is
core drilling with wireline core barrels.
The drilling rig is used for drilling at various
Angles from 0 to 360 degrees.
The drilling rig can be used mainly for
drilling in underground mines (coal, copper, zinc,
salt) or in tunnels, dams, cellars and other places
with limited space that are difficult to access.
Potrzebujesz niezawodnego sprzętu do wiercenia w wymagających warunkach? Wiertnice MCS to nowoczesne, wielozadaniowe urządzenia o napędzie hydraulicznym, zaprojektowane do obrotowego wiercenia otworów w podziemiach kopalń. Dzięki zasilaniu z agregatu hydraulicznego napędzanego silnikiem elektrycznym, oferują wysoką wydajność i niezawodność nawet w trudnym terenie.
Uniwersalne zastosowanie – 360° możliwości!
✅ Wiercenie w skałach o różnej twardości i pod dowolnym kątem
✅ Idealne do odgazowania, badań geologicznych, odwodnienia górotworu oraz iniekcji
✅ Przystosowane do pracy w kopalniach węgla, miedzi, cynku i ołowiu, tunelach, zaporach wodnych czy miejscach o ograniczonej przestrzeni
✅ Bogata gama osprzętu do wiercenia:
✅ Rdzeniówki wrzutowe z koronkami diamentowymi
✅ Rdzeniówki klasyczne z koronkami diamentowymi i węglikowymi
✅ Świdry gryzowe, skrawające (widiowe i PDC), spiralne
✅ Młotki udarowe dolne
MC-S 300L – precyzja i siła w jednym!
Specjalistyczna wiertnica MC-S 300L pozwala na wiercenie zarówno badawcze, jak i pełnoprzewodowe:
✅ Badawcze rdzeniowane (BQ – 60 mm, NQ – 76 mm, HQ – 96 mm)
✅ Pełnym przekrojem (średnice od 65 mm do 143/216 mm)
Precyzja i mobilność w najtrudniejszych warunkach – niezastąpiona w górnictwie i budownictwie podziemnym!
Skontaktuj się z nami i wybierz sprzęt dostosowany do Twoich potrzeb! [Twoje dane kontaktowe]