GEOMACHINE GM100GT drilling rig
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 4323 8...
Show
+49 4323 802527
+49 4323 80...
Show
+49 4323 8025170
+49 172 42...
Show
+49 172 4222113
+49 179 60...
Show
+49 179 6069650
Germany 
Germany, Frankfurt am Main
60 m
Germany, Frankfurt am Main
Germany, Frankfurt am Main
Germany, Peutenhausen / Gachenbach
The GM100GT is a full-fledged drilling rig that can be used for drill drilling, reflection drilling, press reflection drilling, installation of groundwater pipes and sampling.
The machine has a radio remote control for driving, winch and bulldozer. The controls for the drilling functions are in the control panel that can be turned to the side. For press jig drilling, the drill carriage has constant speed controls for rotation and for input speed.
The drill trailer has a double rod lock, the upper one is a swivel rod/shock tube lock for opening.
The feed length is 280 cm and the drill neck is K-6 75 GST92/R38N, customer specific the drill neck can be changed to match the customer's equipment. The drilling trailer has a rotating bar holder on the right side of the machine and a shock tube/
Accessory holder in the front of the machine on top of the bumper plate.
GM100GT DRILL RIG DETAILS:
YOM: 2009
Workinghours: about 5000 h
Diesel engine: Perkins 1104D-E44TA 97 kW 4-cyl.
Engine oil: 10W-40 fully synthetic
Hydraulic pumps: JRR075/JRR065/SNP3 26
Hydraulic valves: Sauer-Danfoss PVG32
Hydraulic hammer: Furukawa F3
Hydraulic oil: Liquid 32
Hydraulic tank: ~300 liters
Fuel tank: ~120 liters
Radio control: Scanreco RC400
Compressor: Gardner Denver CT12
Water pump: Interpump T88
Hydraulic winch: Warn series 18
Recorder: GM Tracker
Length: 5800 mm
Width: 2100 mm
Height: 2600 mm (in transport position)
Weight: ~7500 kg (depending on equipment)
Das GM100GT ist ein vollwertiges Bohrgerät, das für Bohrungen, Reflexionsbohrungen, Pressreflexionsbohrungen, die Installation von Grundwasserleitungen (Brunnenbohrungen) und Probebohrungen eingesetzt werden kann.
Die Maschine verfügt über eine Funkfernsteuerung für Antrieb, Winde und Kettenantrieb. Die Bedienelemente für die Bohrfunktionen befinden sich im seitlich drehbaren Bedienfeld. Für das Bohren mit Bohrlehren verfügt der Bohrschlitten über konstante Drehzahlregelungen für Rotation und Eingangsgeschwindigkeit.
Der Bohrwagen verfügt über eine Doppelstangenverriegelung, die obere ist eine Schwenkstangen-/Stoßrohrverriegelung zum Öffnen.
Die Vorschublänge beträgt 280 cm und der Bohrhals ist aus K-6 75 GST92/R38N, kundenspezifisch kann der Bohrhals angepasst werden. Der Bohrwagen verfügt über einen drehbaren Bohrgestängehalter auf der rechten Seite der Maschine und ein Stoßrohr/
Zubehörhalter vorne an der Maschine oben auf der Stoßplatte.
GM100GT-BOHRGERÄT-DETAILS:
Baujahr: 2009
Betriebsstunden: ca. 5000
Dieselmotor: Perkins 1104D-E44TA 97 kW 4-Zyl.
Motoröl: 10W-40 vollsynthetisch
Hydraulikpumpen: JRR075/JRR065/SNP3 26
Hydraulikventile: Sauer-Danfoss PVG32
Hydraulikhammer: Furukawa F3
Hydrauliköl: Flüssigkeit 32
Hydrauliktank: ~300 Liter
Kraftstofftank: ~120 Liter
Funksteuerung: Scanreco RC400
Kompressor: Gardner Denver CT12
Wasserpumpe: Interpump T88
Hydraulische Winde: Warn-Serie 18
PDE (Prozessdiagnosegerät): GM Tracker
Länge: 5800 mm
Breite: 2100 mm
Höhe: 2600 mm (in Transportstellung)
Gewicht: ~7500 kg (je nach Ausstattung)