Hydraulic control valve for Doosan DH130 DH150-7 mini excavator
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+86 189 289...
+86 189 2896 5241
China
China
Product Overview
When a 13‑to‑15 ton excavator goes down, most contractors do not simply lose the machine — they hire a replacement to keep the job moving. That hire cost runs per week, and it usually exceeds the price of the part that would have fixed the machine. The calculation that matters, then, is not what the valve costs but how many weeks of hire it removes. A DH130 or DH150‑7 sitting idle while a block is ordered from overseas is a machine paying rent for another machine.
The distribution valve assembly divides pump flow among boom, arm, bucket, swing and travel. As it wears, output drops before anything fails: the boom sags on a held bucket, the arm loses bite at the bottom of a cut, swing lands short, and travel bogs under load. Those symptoms come from oil crossing between circuits past worn spools. This assembly replaces the block complete with fresh internals, so the worn unit comes off in one piece and the replacement fits the original port positions.
Core Advantages
1. Measured against hire cost, not parts cost
A block that arrives in days removes weeks of replacement hire. On that basis the assembly is usually the cheaper line in the budget.
2. Output returns where the job is decided
Renewed spools put pressure back into the arm and bucket, so the machine digs at the rate it was hired for.
3. Loads hold through the cycle
A sagging boom forces a re‑spot every pass. Restored retention keeps the bucket where it was set.
4. Swing placement becomes reliable again
Restored circuit isolation ends the double‑input habit that costs seconds on every placement.
5. Complete assembly avoids a second downtime
One tested block resolves every drifted circuit, rather than one repair visit followed by another.
Manufacturing & Quality Control
Spool and bore pairs are machined to print tolerance, matched by size, and hand‑run‑in until full‑stroke movement is free of binding. Assembled blocks are flow‑tested circuit by circuit with relief values logged against model figures; out‑of‑window units are stripped and corrected. Blocks ship internally oil‑fogged, ports capped, and crated on foam.
Frequently Asked Questions
Q1: Does this block cover both the DH130 and DH150‑7?
A: They share a platform but differ in trim and some porting. Send the machine serial plate and a photo of the existing valve tag and we confirm the matching configuration.
Q2: What symptoms justify replacing rather than continuing to run?
A: Boom drift, lost bite at the bottom of a cut, inconsistent swing and load‑dependent tracking all reduce output. Once several appear together, the block is usually the source.
Q3: Can my existing block be rebuilt?
A: If the casting is sound and has never been rebuilt, a kit may restore it. Where several circuits leak, a complete assembly is usually the better cost. Photos help us judge.
Q4: How quickly can the machine be back on hire‑free work?
A: Express or air freight is realistic for one assembly. With a day for installation, most owners are back within the freight window rather than a full sea transit.
Q5: What hydraulic servicing accompanies the swap?
A: Flush the system, renew the return filter, clean the suction strainer, and refill with specified oil. Contaminated oil damages new clearances quickly.
Q6: What is excluded from warranty?
A: Material and assembly faults are covered. Damage from dirty oil, water ingress, a spool forced against a bind, or reliefs altered outside specification is not. Photograph the crate before opening if damage is visible.